Accessories

How to Disconnect Apple Watch in 3 Easy Ways

How to disconnect Apple Watch

Are you puzzled by the idea of how to disconnect apple watch from your iPhone? If yes, then you don’t need to worry anymore; this article is your final stop. 

The apple watch is considered the best smartwatch due to its amazing features that make our lives easier, such as tracking your workout, shopping, and even answering calls and texts. Though it works amazingly, it also needs to be restored from time to time. So, whenever you decide to reset your Apple watch or connect it with a new device, you will be required to unpair it from your current iPhone. Unpairing the Apple watch from the iPhone might be tricky sometimes. Therefore, here we have explained for you how to disconnect apple watch from your iPhone. 

How Do You Unpair an Apple Watch from An iPhone?

People with less technical understanding may find it hard to unpair their Apple Watch from the iPhone. Here, we are stating three easy methods on how to disconnect Apple Watch from your iPhone. 

Method 1: Unpair Through the iPhone App

This is one of the easiest methods for the process of ‘how do you unpair an Apple Watch’ using the iPhone App. You need to follow the following steps:

  • Open the Apple Watch app on your iPhone.
  • Select the All Watches option (on the top of the screen)
  • Click the Info button, to access more information (on the right side)
  • Now, go to the Unpair Apple Watch tab to unpair your apple watch.
  • Put your Apple ID and password in there.
  • Confirm the same.
  • Disable Activation Lock (a new iPhone won’t be able to pair if you don’t).

All the data in your Apple watch will be backed up in your iPhone and the factory settings will be restored. So, this is the first method of ‘how do you unpair an Apple Watch’ via iPhone App. 

Method 2: Unpair the Apple Watch Directly 

This technique of how do you unpair an Apple Watch immediately from the watch itself, instead of going through the steps stated in the above method. One drawback of this method is that it does not automatically backup data like the first one. If you don’t want a data backup, here’s what you need to do:

  • Open the Settings app on your watch.
  • Select General and then click on Reset.
  • Enter your password to continue.
  • Select the Erase All option (click Keep Plan if you have a cellular plan saved)

Once you’ve completed the above-mentioned steps, go to the iCloud website. 

  • Login to disable the Activation Lock.
  • Enter your Apple ID and password (if you don’t remember your password, contact Apple).
  • Select Settings from the drop-down menu.
  • Choose your Apple Watch.
  • Select My Devices from the drop-down menu.
  • Click the X next your watch name
  • Tap “Remove”

Method 3: Unpair Directly Through the Watch (Without Using Your Password)

If you don’t remember your Apple ID and/or password, the above two methods of ‘how to disconnect Apple Watch’ are not for you. This third method is your solution in this case. All you have to do to follow the steps mentioned below in order:

  • Firmly push the Side button on the smartwatch while it is plugged in.
  • Press and hold the power-off slider.
  • Erase All Content & Settings.

FAQs

What is the procedure for pairing my Apple Watch with a new phone?

You’ll need the following things before we begin:

• Apple ID and Password

• An uninterrupted WiFi connection

• Charge your iPhone and Apple Watch to at least 50% capacity.

• The passcode of your watch

Here’s how to pair the Apple watch with a new phone:

  • Place the watch on your wrist.
  • Press the Side button to turn it on.
  • Launch the Apple Watch app on your new phone.
  • Start Pairing by pressing the Start button.
  • You’ll be asked to adjust the camera on your phone so that the QR code on your watch appears in the camera.
  • Wait for a few seconds to connect.
  • Select Set Up from the drop-down menu.
  • The two devices will display instructions. Follow their instructions to finish the process.
  • Keep your iPhone close to the smartwatch for the pairing to work efficiently.

Does Unpairing Your Apple Watch Erase The Data?

This is determined by the method for how to unpair an Apple Watch you are using to unpair your apple watch. If you unpair via the iPhone app, no data will be lost as everything will already be backed up. Unpairing straight from the smartwatch, on the other hand, is practically a factory reset. All of the information on the watch would be erased.

Your activation lock will not be removed if you use the factory reset method. As a result, no new devices will be able to connect.

How Do You Know if Your Apple Watch is Paired to Your Phone?

It’s not difficult to figure out. To access the control center, simply press and hold the bottom of your watch’s screen, then swipe down. On the Connection Status bar, if there is a paired device, it will appear.

How Do You Reset Your Apple Watch?

If you’ve linked your watch with a new device and are facing problems with the software, it can be resolved after a factory reset. If you wish to wipe your personal data, a factory reset is also the way to go.

Methods 2 and 3 on ‘how to disconnect Apple Watch’ unpairing are effectively factory resets, as mentioned above. You can read the methods in detail in the upper section but for your convenience, they are once again summed up below:

1st Method:

  • Open the Settings app ON YOUR WATCH.
  • Choose “General”.
  • Press the Reset button (You may need to scroll down to find it)
  • Select Erase All Content from the drop-down menu in Settings.
  • Now, enter your password.
  • Click on “Erase” and you are all done.

2nd Method:

  • Connect your Apple Watch to the charger.
  • Push the Side button gently.
  • When the power off slider appears, press and then release it.
  • Select Erase All Content from the drop-down menu in Settings.

Final Words

Unpairing your Apple Watch from your iPhone is a relatively simple process but sometimes it can prove trickier. The three methods for ‘how to disconnect Apple Watch’ mentioned in this article can assist you in the process. If you’re thinking about selling your watch or buying a new one, these methods can prove very helpful. 

Among the three, the best way to unpair is to use the iPhone app. Your data would be automatically stored, and you’d be able to remove the activation lock without having to go to the iCloud website and do it manually.

People Also Like: Noise ColorFit Pro 3 Assist- A Pro Workout Partner With Built-in Alexa

Related Articles

Master & Dynamic MW07 Plus Review: Great Audio at Reasonable Price

Nitin

A Comprehensive Inspection of HyperX Cloud Stinger

Sandy Smith

Noise ColorFit Pro 3 Assist: A Pro Workout Partner With Built-in Alexa

Nitin

Leave a Comment